Main Menu; Figure 356 Main Menu (Router Mode) - ZyXEL Communications ZYWALL 35 User Manual

Table 207 Main Menu Commands
OPERATION KEYSTROKES
Move the
cursor
Entering
information
Required
fields
N/A fields
Save your
configuration
Exit the SMT

33.3.1 Main Menu

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
This guide uses the ZyWALL 70 menus as an example. The menus may vary slightly for
different ZyWALL models. Not all fields or menus are available on all models.

Figure 356 Main Menu (Router Mode)

ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You can
[DOWN] arrow also use the [UP]/[DOWN] arrow keys to move to the previous and
keys the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key to
move to the bottom of a menu.
Fill in, or press You need to fill in two types of fields. The first requires you to type
[SPACE BAR], in the appropriate information. The second allows you to cycle
then press through the available choices by pressing [SPACE BAR].
[ENTER] to select
from choices.
<? > All fields with the symbol <?> must be filled in order be able to
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Make sure you save your settings in each screen that you
configure.
Type 99, then Type 99 at the main menu prompt and press [ENTER] to exit the
press [ENTER]. SMT interface.
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ZyWALL 70 Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
5. DMZ Setup
6. Route Setup
7. Wireless Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:
Chapter 33 Introducing the SMT
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy Setup
26. Schedule Setup
99. Exit
597