Back To Factory Defaults; Figure 348 Configuration Upload Successful; Figure 349 Network Temporarily Disconnected; Figure 350 Configuration Upload Error - ZyXEL Communications ZYWALL 35 User Manual

Chapter 32 Maintenance
After you see a "restore configuration successful" screen, you must then wait one minute
before logging into the ZyWALL again.

Figure 348 Configuration Upload Successful

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 349 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
your Quick Start Guide for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 350 Configuration Upload Error

32.11.3 Back to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the
ZyWALL to its factory defaults as shown on the screen. The following warning screen
appears.
588
ZyWALL 5/35/70 Series User's Guide