ZyXEL Communications ZYWALL 35 User Manual page 68

Chapter 2 Introducing the Web Configurator
Table 4 Web Configurator HOME Screen in Router Mode (continued)
LABEL
Virus Detected
Spam Mail
Detected
Web Site Blocked
Top 5 Intrusion &
Virus Detections
Rank
Intrusion Detected
Virus Detected
3G WAN Interface
Status
show detail / hide
detail
3G Connection
Status
Service Provider
Signal Strength
68
DESCRIPTION
This displays how many virus-infected files the ZyWALL has detected since it last
started up. It also displays the percentage of virus-infected files out of the total
number of files that the ZyWALL has scanned (since it last started up). N/A
displays when the ZyWALL has never had an anti-virus subscription or there is no
Turbo Card installed. Disable displays when anti-virus threat statistics collection
is disabled.
Click the field label to go to the related screen.
This displays how many spam e-mails the ZyWALL has detected since it last
started up. It also displays the percentage of spam e-mail out of the total number
of e-mails that the ZyWALL has scanned (since it last started up). Disable
displays when anti-spam threat statistics collection is disabled.
Click the field label to go to the related screen.
This displays how many web site hits the ZyWALL has blocked since it last
started up. N/A displays when the ZyWALL has never had an external database
content filtering service subscription. Disable (collect statistics) displays when the
ZyWALL has been subscribed to the external database content filtering service,
but content filtering is not active.
Click the field label to go to the related screen.
The following is a list of the five intrusions or viruses that the ZyWALL has most
frequently detected since it last started up.
This is the ranking number of an intrusion or virus. This is an intrusion's or virus's
place in the list of most common intrusions or viruses.
This is the name of a signature for which the ZyWALL has detected matching
packets. The number in brackets indicates how many times the signature has
been matched.
Click the hyperlink for more detailed information on the intrusion.
This is the name of the virus that the ZyWALL has detected.
These fields display when a 3G card is inserted and the 3G connection is
enabled.
Click show detail to see more information about the 3G connection. Click hide
detail to
WAN2 (the remote node name configured through the SMT) displays when the
3G connection is up.
Ready to Connect displays when the 3G card is inserted and enabled.
Connecting displays when the ZyWALL is trying to bring the 3G connection up.
Connected displays when the 3G connection is up.
Down displays when the 3G connection is down or not activated.
Idle displays when the 3G connection is idle.
Init displays when the ZyWALL is initializing the 3G card.
Drop displays when the ZyWALL is dropping a call.
This field also displays the type of the network to which the ZyWALL is
connected. The network type varies depending on the 3G card you inserted and
could be UMTS, HSDPA, GPRS or EDGE when you insert a GSM 3G card, or
1xRTT, EVDO Rev.0 or EVDO Rev.A when you insert a CDMA 3G card.
This displays the name of your network service provider or Limited Service when
the signal strength is too low.
This displays the strength of the signal. The signal strength mainly depends on
the antenna output power and the distance between your ZyWALL and the
service provider's base station. You can see a signal strength indication even
when the ZyWALL does not have a 3G connection (because the signal is still
there even when the ZyWALL is not using it).
ZyWALL 5/35/70 Series User's Guide