Ipsec Sa Using Manual Keys; Ipsec Sa Proposal Using Manual Keys; Authentication And The Security Parameter Index (Spi); Vpn Rules (Manual) - ZyXEL Communications ZYWALL 35 User Manual

Chapter 18 IPSec VPN

18.10 IPSec SA Using Manual Keys

You might set up an IPSec SA using manual keys when you want to establish a VPN tunnel
quickly, for example, for troubleshooting. You should only do this as a temporary solution,
however, because it is not as secure as a regular IPSec SA.
In IPSec SAs using manual keys, the ZyWALL and remote IPSec router do not establish an
IKE SA. They only establish an IPSec SA. As a result, an IPSec SA using manual keys has
some characteristics of IKE SA and some characteristics of IPSec SA. There are also some
differences between IPSec SA using manual keys and other types of SA.

18.10.1 IPSec SA Proposal Using Manual Keys

In IPSec SA using manual keys, you can only specify one encryption algorithm and one
authentication algorithm. You cannot specify several proposals. There is no DH key exchange,
so you have to provide the encryption key and the authentication key the ZyWALL and remote
IPSec router use.
The ZyWALL and remote IPSec router must use the same encryption key and
authentication key.

18.10.2 Authentication and the Security Parameter Index (SPI)

For authentication, the ZyWALL and remote IPSec router use the SPI, instead of pre-shared
keys, ID type and content. The SPI is an identification number.
The ZyWALL and remote IPSec router must use the same SPI.

18.11 VPN Rules (Manual)

Refer to Figure 203 on page 353
configurator.
Click SECURITY > VPN > VPN Rules (Manual) to open the VPN Rules (Manual) screen.
Use this screen to manage the ZyWALL's list of VPN rules (tunnels) that use manual keys.
You may want to configure a VPN rule that uses manual key management if you are having
problems with IKE key management.
380
for a graphical representation of the fields in the web
ZyWALL 5/35/70 Series User's Guide