ZyXEL Communications ZYWALL 35 User Manual page 558

Internet security appliance
Hide thumbs Also See for ZYWALL 35:
Table of Contents

Advertisement

Chapter 31 Logs Screens
Table 181 3G Logs (continued)
LOG MESSAGE
Budget counters are reset,
budget control is resumed.
Budget control is resumed.
Budget control is disabled.
Skip 3G SIM authentication
because 3G configuration is
not set.
3G SIM authentication
failed because of no
response from SIM card.
3G card has no response,
card is restarted.
3G SIM card PIN code is
incorrect.
The 3G card is not
activated.
3G Modem is locked.
SIM card not inserted or
damaged.
3G connection has been
dropped - %s.
3G signal strength is
refreshed (%d dBm).
Warning: (%IMSI% or %ESN%)
Over time budget! (budget =
%CONFIGURED_BUDGET% hours,
used = %USED_VOLUME%(2
decimals) hours).
Warning: (%IMSI% or %ESN%)
Over %THRESHOLD%% of time
budget (%REMAIN_BUDGET%(2
decimals) hours remain in
%CONFIGURED_BUDGET% hours
budget).
558
DESCRIPTION
The ZyWALL restarted budget calculation from 0 after resetting
the existing statistics.
The ZyWALL kept the existing budget control statistics and
continue a counting.
Budget control is deactivated for the user account of the
installed 3G card on the ZyWALL.
The ZyWALL skipped SIM card authentication because the PIN
code is not specified or SIM card authentication is disabled.
SIM card authentication failed because the ZyWALL received a
SIM busy message three times when querying for the card
status.
The card was reset due to no response from the card for a
period of time.
The specified PIN code does not match the inserted GSM 3G
card.
The user account of the 3G card is not activated.
The internal modem on the inserted 3G card is blocked.
There is no SIM card in the inserted GSM 3G card or the SIM
card is damaged.
The 3G connection has been dropped due to the specific
reason, such as idle timeout, manual disconnection, failure to
get an IP address, switching to WAN 1, ping check failure,
connection reset, and so on.
The ZyWALL updated the 3G network signal strength
indication.
This shows that the pre-configured time budget was exceeded.
This also displays the IMSI of the SIM card in an inserted GSM
3G card or the ESN of the inserted CDMA 3G card and the 3G
connection's usage time in hours.
This shows that the specified percentage of the time budget
was exceeded. This also displays the IMSI of the SIM card in
an inserted GSM 3G card or the ESN of the inserted CDMA 3G
card and the amount of time (in hours) the 3G connection can
still be used.
ZyWALL 5/35/70 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents