Viewing Protocol/Port; Figure 321 Reports > System Reports: Protocol/Port Example; Table 165 Reports > System Reports: Protocol/ Port - ZyXEL Communications ZYWALL 35 User Manual

30.2.3 Viewing Protocol/Port

In the Reports screen, select Protocol/Port from the Report Type drop-down list box to have
the ZyWALL record and display which protocols or service ports have been used the most and
the amount of traffic for the most used protocols or service ports.
Figure 321 REPORTS > SYSTEM REPORTS: Protocol/Port Example
The following table describes the labels in this screen.
Table 165 REPORTS > SYSTEM REPORTS: Protocol/ Port
LABEL
Protocol/Port
Direction
Amount
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
This column lists the protocols or service ports for which the most traffic has gone
through the ZyWALL. The protocols or service ports are listed in descending order with
the most used protocol or service port listed first.
This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN, DMZ or WLAN. This field displays Outgoing to denote traffic that is going out
from the LAN, DMZ or WLAN to the WAN.
This column lists how much traffic has been sent and/or received for each protocol or
service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic for the particular protocol or service port. The count starts
over at 0 if a protocol or port passes the bytes count limit (see
Chapter 30 Reports
Table 166 on page 540).
539