Edit Ip; Figure 398 Menu 11.1: Remote Node Profile For Pptp Encapsulation; Table 237 Menu 11.1: Remote Node Profile For Pptp Encapsulation - ZyXEL Communications ZYWALL 35 User Manual

Chapter 41 Remote Node Setup

Figure 398 Menu 11.1: Remote Node Profile for PPTP Encapsulation

Rem Node Name= WAN 1
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Outgoing:
PPTP:
The next table shows how to configure fields in menu 11.1 not previously discussed.

Table 237 Menu 11.1: Remote Node Profile for PPTP Encapsulation

FIELD
Encapsulation
My IP Addr
My IP Mask
Server IP Addr
Connection ID/
Name
Schedules
Nailed-Up
Connections

41.4 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes.
Press [ENTER] to open Menu 11.1.2 - Remote Node Network Layer Options. Not all fields
are available on all models.
654
Menu 11.1 - Remote Node Profile
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
My IP Addr= 10.0.0.140
My IP Mask= 255.255.255.0
Server IP Addr= 10.0.0.138
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu
11.3 to check the IP Address setting once you have selected the encapsulation
method.
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must follow the "c:id" and
"n:name" format.
This field is optional and depends on the requirements of your DSL modem.
You can apply up to four schedule sets here. For more details refer to
on page 747.
Press [SPACE BAR] and then [ENTER] to select Yes if you want to make the
connection to this remote node a nailed-up connection.
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
ZyWALL 5/35/70 Series User's Guide
Chapter 52