Figure 344 Firmware Upload In Process; Figure 345 Network Temporarily Disconnected; Figure 346 Firmware Upload Error - ZyXEL Communications ZYWALL 35 User Manual

Chapter 32 Maintenance
Do not turn off the ZyWALL while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyWALL again.

Figure 344 Firmware Upload In Process

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 345 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the HOME screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.

Figure 346 Firmware Upload Error

586
ZyWALL 5/35/70 Series User's Guide