Ip Policy Routing Example; Figure 485 Menu 25.1.1: Ip Routing Policy Setup; Table 266 Menu 25.1.1: Ip Routing Policy Setup - ZyXEL Communications ZYWALL 35 User Manual

Figure 485 Menu 25.1.1: IP Routing Policy Setup

The following table describes the fields in this screen.

Table 266 Menu 25.1.1: IP Routing Policy Setup

FIELD
LAN/DMZ/WLAN/
ALL WAN
Selected Remote
Node index
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

51.3 IP Policy Routing Example

If a network has both Internet and remote node connections, you can route Web packets to the
Internet using one policy and route FTP packets to a remote network using another policy. See
the next figure.
Route 1 represents the default IP route and route 2 represents the configured IP route.
ZyWALL 5/35/70 Series User's Guide
Menu 25.1.1 - IP Routing Policy Setup
Apply policy to packets received from:
LAN= No
DMZ= No
WLAN= No
ALL WAN= Yes
Selected Remote Node index= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to
apply the policy to packets received on the specific interface(s).
If you select No in the ALL WAN field, enter the number of the WAN interface.
Chapter 51 IP Policy Routing
743