How To Configure Site-To-Site Ipsec Vpn With Amazon Vpc - ZyXEL Communications ZyWALL 110 Handbook & Instructions

How to Configure Site-to-site IPSec VPN with Amazon VPC

This example shows how to use the VPN Setup Wizard to create a site-to-site VPN
between a ZyWALL/USG and an Amazon VPC platform. The example instructs
how to configure the VPN tunnel between each site. When the VPN tunnel is
configured, each site can be accessed securely.
Figure 1 ZyWALL/USG Site-to-site IPSec VPN with Amazon VPC
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks.
This example was tested using USG110 (Firmware Version: ZLD 4.15) and Amazon
VPC (June, 2016).
www.zyxel.com
8/255