InterPuls milkrite Cluster Flush User Instruction Manual page 22

5730018_06.22_EN
Washing bypass
A switch can be added connected to the 4-5 contacts of the board to enable or disable unit washing between
milking processes.
By closing this contact, the cluster flush device is bypassed and the rest of the system (milking panel, CV,
DVC) continues to operate normally without carrying out washing between individual milking processes.
NOTE
This switch is not supplied but you can use any commercial switch.
This manual is the property of InterPuls S.p.A. - any copying, even partial, is strictly prohibited.
22
Original instructions