Table of Contents
Advertisement
Chapter 17 Troubleshooting
2 Make sure the keypad is unlocked. Press # and the Left key to unlock it.
17.2 V630 Web Configurator Access and Login
I forgot the IP address for the V630.
1 Check the IP address the V630 is using in the Setup > Information > TCP/IP LCD
menu.
2 Set a static IP address for the V630 in the Network > WLAN Profiles > Profiles List >
Edit > IP Setting menus (see
I forgot the password.
1 The default user password is password. The default administrator password is admin.
2 If this does not work, you have to reset the device to its factory defaults. See
5.18 on page
I cannot see or access the Login screen in the web configurator.
1 Before you can access the web configurator, you must enable it in the Menu > Setup >
Phone Setting > Web Configurator LCD menu.
2 Make sure you are using the correct IP address.
• Check the IP address the V630 is using in the Setup > Information > TCP/IP LCD
menu.
• If you changed the IP address
3 Check that the phone is on and connected to an AP. You should see the wireless signal
icon.
4 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
5 Make sure your computer is in the same subnet as the V630. See
153
computer and the V630, skip this step.)
6 If the problem continues, contact the network administrator or vendor.
I can see the Login screen, but I cannot log in to the V630.
142
59.
Appendix C on page
and
Appendix D on page
Section 6.12 on page
76).
(Section 16.1 on page
189.
197. (If you know that there are routers between your
Section
139), use the new IP address.
Appendix A on page
V630 User's Guide
Advertisement
Table of Contents
Troubleshooting
