Prestige 2602R Series User's Guide
16.0.2 Diagnostic DSL Line Screen
Click Diagnostic and then DSL Line to open the screen shown next.
Figure 65 Diagnostic: DSL Line
The following table describes the fields in this screen.
Table 34 Diagnostic: DSL Line
LABEL
Reset ADSL
Line
ATM Status
ATM Loopback
Test
Upstream Noise
Margin
Downstream
Noise Margin
Back
141
Click this button to reinitialize the ADSL line. The large text box above then displays
the progress and results of this operation, for example:
"Start to reset ADSL
Loading ADSL modem F/W...
Reset ADSL Line Successfully!"
Click this button to view ATM status.
Click this button to start the ATM loopback test. Make sure you have configured at
least one PVC with proper VPIs/VCIs before you begin this test. The Prestige sends
an OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it back) to the
Prestige. The ATM loopback test is useful for troubleshooting problems with the
DSLAM and ATM network.
Click this button to display the upstream noise margin.
Click this button to display the downstream noise margin.
Click this button to go back to the main Diagnostic screen.
DESCRIPTION
Chapter 16 Diagnostic Screens