System Statistics; Figure 61 System Status: Show Statistics; Table 30 System Status: Show Statistics - ZyXEL Communications PRESTIGE 2602R Series User Manual

Prestige 2602R Series User's Guide

14.0.1 System Statistics

Click Show Statistics in the System Status screen to open the following screen. Read-only
information here includes port status and packet specific statistics. Also provided are "system
up time" and "poll interval(s)". The Poll Interval(s) field is configurable.

Figure 61 System Status: Show Statistics

The following table describes the fields in this screen.

Table 30 System Status: Show Statistics

LABEL
System up Time
CPU Load
WAN Port Statistics
Link Status This is the status of your WAN link.
Upstream Speed This is the upstream speed of your Prestige.
Downstream Speed This is the downstream speed of your Prestige.
Node-Link This field displays the remote node index number and link type. Link types are
135
DESCRIPTION
This is the elapsed time the system has been up.
This field specifies the percentage of CPU utilization.
The follow fields display statistics for the WAN port.
PPPoA, ENET, RFC 1483 and PPPoE.
Status For the WAN port, this displays the port speed and duplex setting if you're using
Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial
(starting to trigger a call) and drop (dropping a call) if you're using PPPoE
encapsulation.
Chapter 14 System Status Screen