Upnp And Zyxel; Configuring Upnp; Figure 42 Configuring Upnp; Table 25 Configuring Upnp - ZyXEL Communications PRESTIGE 2602R Series User Manual

Prestige 2602R Series User's Guide

12.2 UPnP and ZyXEL

ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum Creates
UPnP™ Implementers Corp. (UIC). ZyXEL's UPnP implementation supports IGD 1.0
(Internet Gateway Device). At the time of writing ZyXEL's UPnP implementation supports
Windows Messenger 4.6 and 4.7 while Windows Messenger 5.0 and Xbox are still being
tested.
The Prestige only sends UPnP multicasts to the LAN.
See later sections for examples of installing UPnP in Windows XP and Windows Me as well
as an example of using UPnP in Windows.

12.2.1 Configuring UPnP

From the Site Map in the main menu, click UPnP under Advanced Setup to display the
screen shown next.

Figure 42 Configuring UPnP

The following table describes the fields in this screen.

Table 25 Configuring UPnP

LABEL
Enable the Universal Plug
and Play (UPnP) Service
Allow users to make
configuration changes
through UPnP
Apply
Cancel
115
DESCRIPTION
Select this checkbox to activate UPnP. Be aware that anyone could use
a UPnP application to open the web configurator's login screen without
entering the Prestige's IP address (although you must still enter the
password to access the web configurator).
Select this check box to allow UPnP-enabled applications to
automatically configure the Prestige so that they can communicate
through the Prestige, for example by using NAT traversal, UPnP
applications automatically reserve a NAT forwarding port in order to
communicate with another UPnP enabled device; this eliminates the
need to manually configure port forwarding for the UPnP enabled
application.
Click Apply to save the setting to the Prestige.
Click Cancel to return to the previously saved settings.
Chapter 12 Universal Plug-and-Play (UPnP)