Displaying Logs; Log Command Example; Figure 224 Log Command Example - ZyXEL Communications PRESTIGE 2602R Series User Manual

Displaying Logs

• Use the sys logs display command to show all of the logs in the Prestige's log.
• Use the sys logs category display command to show the log settings for all of the log
categories.
• Use the sys logs display [log category] command to show the logs in an individual
Prestige log category.
• Use the sys logs clear command to erase all of the Prestige's logs.

Log Command Example

This example shows how to set the Prestige to record the access logs and alerts and then view
the results.

Figure 224 Log Command Example

ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
# .time
message
7|01/01/2000 09:40:13 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
8|01/01/2000 09:40:07 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
9|01/01/2000 09:40:04 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
10|01/01/2000 09:40:04 |192.168.1.33:1199
RWARD
Firewall default policy: TCP (L to W)
11|01/01/2000 09:40:04 |192.168.1.1:53
RWARD
none: UDP
Appendix H Log Descriptions
source
Prestige 2602R Series User's Guide
destination
|192.168.1.33:1
|192.168.1.33:1
|192.168.1.33:1
|207.69.188.186:110
|192.168.1.33:1200
notes
|ACCESS FO
|ACCESS FO
|ACCESS FO
|ACCESS FO
|ACCESS FO
340