ZyXEL Communications PRESTIGE 2602R Series User Manual page 108

Table 23 Time and Date (continued)
LABEL
Start Date
End Date
Synchronize
system clock with
Time Server now.
Date
Current Date
New Date (yyyy-
mm-dd)
Time
Current Time
New Time
Apply
Cancel
Chapter 10 Time and Date
DESCRIPTION
Enter the month and day that your daylight-savings time starts on if you selected
Daylight Savings.
Enter the month and day that your daylight-savings time ends on if you selected
Daylight Savings.
Select this option to have your Prestige use the time server (that you configured
above) to set its internal system clock.
Please wait for up to 60 seconds while the Prestige locates the time server. If the
Prestige cannot find the time server, please check the time server protocol and its
IP address. If the IP address was entered correctly, try pinging it for example to
test the connection.
This field displays the date of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time
server.
This field displays the last updated date from the time server.
When you select None in the Use Protocol when Bootup field, enter the new
date in this field and then click Apply.
This field displays the time of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time
server.
This field displays the last updated time from the time server.
When you select None in the Use Protocol when Bootup field, enter the new
time in this field and then click Apply.
Click Apply to save your changes back to the Prestige.
Click Cancel to begin configuring this screen afresh.
Prestige 2602R Series User's Guide
108