Chapter 10 Time And Date; Pre-Defined Ntp Time Servers List; Configuring Time And Date; Table 22 Pre-Defined Ntp Time Servers - ZyXEL Communications PRESTIGE 2602R Series User Manual

10.1 Pre-defined NTP Time Servers List

The Prestige uses the following pre-defined list of NTP time servers if you do not specify a
time server or it cannot synchronize with the time server you specified.
Note: The Prestige can use this pre-defined list of time servers regardless of the Time
Protocol you select.
When the Prestige uses the pre-defined list of NTP time servers, it randomly selects one server
and tries to synchronize with it. If the synchronization fails, then the Prestige goes through the
rest of the list in order from the first one tried until either it is successful or all the pre-defined
NTP time servers have been tried.

Table 22 Pre-defined NTP Time Servers

ntp1.cs.wisc.edu
ntp1.gbg.netnod.se
ntp2.cs.wisc.edu
tock.usno.navy.mil
ntp3.cs.wisc.edu
ntp.cs.strath.ac.uk
ntp1.sp.se
time1.stupi.se
tick.stdtime.gov.tw
tock.stdtime.gov.tw
time.stdtime.gov.tw

10.2 Configuring Time and Date

To change your Prestige's time and date, click Time And Date. The screen appears as shown.
Use this screen to configure the Prestige's time based on your local time zone.

Chapter 10 Time and Date

Prestige 2602R Series User's Guide
C
H A P T E R
Time and Date
1 0
106