Chapter 15 Dhcp Table & Any Ip; Introduction; Any Ip Table Screen; Figure 62 Dhcp Table - ZyXEL Communications PRESTIGE 2602R Series User Manual

15.1 Introduction

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If set to None, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click Maintenance, and then the DHCP Table tab. Read-only information here relates to
your DHCP status. The DHCP table shows current DHCP Client information (including IP
Address, Host Name and MAC Address) of all network clients using the DHCP server.

Figure 62 DHCP Table

The following table describes the fields in this screen.

Table 31 DHCP Table

LABEL
Host Name
IP Address
MAC Address This field displays the MAC (Media Access Control) address of the computer with the

15.2 Any IP Table Screen

Click Maintenance, Any IP. The Any IP table shows current read-only information
(including the IP address and the MAC address) of all network devices that use the Any IP
feature to communicate with the Prestige. Refer to the Any IP section for more information.
Chapter 15 DHCP Table & Any IP
DHCP Table & Any IP
DESCRIPTION
This is the name of the host computer.
This field displays the IP address relative to the Host Name field.
displayed host name.
Every Ethernet device has a unique MAC address. The MAC address is assigned at
the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Prestige 2602R Series User's Guide
C
H A P T E R
1 5
138