Figure 144 Menu 24.1 System Maintenance : Status; Table 65 Menu 24.1 System Maintenance: Status - ZyXEL Communications PRESTIGE 2602R Series User Manual

Prestige 2602R Series User's Guide
The following table describes the fields present in Menu 24.1 — System Maintenance —
Status which are read-only and meant for diagnostic purposes.

Figure 144 Menu 24.1 System Maintenance : Status

Node-Lnk Status
Time
1-PPPoA N/A
2 N/A
3 N/A
4 N/A
5 N/A
6 N/A
7 N/A
My WAN IP (from ISP): 0.0.0.0
Ethernet:
Status:
Collisions: 0
CPU Load =
The following table describes the fields present in Menu 24.1 — System Maintenance —
Status.

Table 65 Menu 24.1 System Maintenance: Status

FIELD
Node-Lnk
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
My WAN IP
(from ISP)
Ethernet
Status
Tx Pkts
Rx Pkts
Collision
WAN
219
Menu 24.1 - System Maintenance - Status
TxPkts
0
0
0
0
0
0
0
Tx Pkts: 528
Rx Pkts: 505
2.12%
Press Command:
COMMANDS: 1-Reset Counters
DESCRIPTION
This is the node index number and link type. Link types are: PPP, ENET, 1483.
This shows the status of the remote node.
The number of transmitted packets to this remote node.
The number of received packets from this remote node.
The number of error packets on this connection.
This shows the transmission rate in bytes per second.
This shows the receiving rate in bytes per second.
This is the time this channel has been connected to the current remote node.
This is the IP address of the ISP remote node.
This shows statistics for the LAN.
This shows the current status of the LAN.
This is the number of transmitted packets to the LAN.
This is the number of received packets from the LAN.
This is the number of collisions.
This shows statistics for the WAN.
RxPkts Errors
0 0
0 0
0 0
0 0
0 0
0 0
0 0
WAN:
Line Status: Down
Upstream Speed:
Downstream Speed:
ESC-Exit
Chapter 29 System Information and Diagnosis
00:36:37
Sat. Jan. 01, 2000
Tx B/s Rx B/s Up
0 0 0:00:00
0 0 0:00:00
0 0 0:00:00
0 0 0:00:00
0 0 0:00:00
0 0 0:00:00
0 0 0:00:00
0 kbps
0 kbps