Remote Management; Figure 231 Menu 24.11 - Remote Management Control; Control - ZyXEL Communications P-793H User Manual

P-793H User's Guide
Table 126 Menu 24.10: System Maintenance - Time and Date Setting (continued)
FIELD
End Date (mm-
nth-week-hr)
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.

35.4 Remote Management

To disable remote management of a service, select Disable in the corresponding Server
Access field. Enter 11 from menu 24 to bring up Menu 24.11 - Remote Management

Control.

Figure 231 Menu 24.11 – Remote Management Control
TELNET Server:
Server Port = 23
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80
Secured Client IP = 0.0.0.0
346
DESCRIPTION
Configure the day and time when Daylight Saving Time ends if you selected Yes in
the Daylight Saving field. The hr field uses the 24 hour format. Here are a couple
of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Oct., Last, Sun. and type 02 in
the hr field.
Daylight Saving Time ends in the European Union on the last Sunday of October.
All of the time zones in the European Union stop using Daylight Saving Time at the
same moment (1 A.M. GMT or UTC). So in the European Union you would select
Oct., Last, Sun. The time you type in the hr field depends on your time zone. In
Germany for instance, you would type 02 because Germany's time zone is one
hour ahead of GMT or UTC (GMT+1).
Menu 24.11 - Remote Management Control
Server Access = ALL
Server Access = ALL
Server Access = ALL
Chapter 35 Menus 24.8 to 24.11