Screen 1; Screen 2; Figure 17 Bandwidth Management Wizard: General Information; Table 13 Bandwidth Management Wizard: General Information - ZyXEL Communications P-793H User Manual

3.2.1 Screen 1

Activate bandwidth management and select to allocate bandwidth to packets based on the
services.

Figure 17 Bandwidth Management Wizard: General Information

The following fields describe the label in this screen.

Table 13 Bandwidth Management Wizard: General Information

LABEL
Active
Services Setup
Back
Next
Exit

3.2.2 Screen 2

Use the second wizard screen to select the services that you want to apply bandwidth
management, and select the priorities that you want to apply to the services listed.
Chapter 3 Wizards
DESCRIPTION
Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device's WAN or LAN port. If
you do not select this, you cannot run the rest of the wizard.
Select Services Setup to allocate bandwidth based on the service requirements.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-793H User's Guide
63