Uploading Firmware And Configuration Files; Firmware File Upload; Figure 216 Restore Configuration Example; Figure 217 Successful Restoration Confirmation Screen - ZyXEL Communications P-793H User Manual

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the
following screen.

Figure 216 Restore Configuration Example

4 After a successful restoration you will see the following screen. Press any key to restart
the ZyXEL Device and return to the SMT menu.

Figure 217 Successful Restoration Confirmation Screen

34.5 Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can upload
configuration files by following the procedure in
instructions in Menu 24.7.2 - System Maintenance - Upload System Configuration File
(for console port).
Note: WARNING!
Do not interrupt the file transfer process as this may PERMANENTLY
DAMAGE YOUR ZyXEL Device.

34.5.1 Firmware File Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature,
your computer must have an FTP client.
When you telnet into the ZyXEL Device, you will see the following screens for uploading
firmware and the configuration file using FTP.
Chapter 34 Firmware and Configuration File Maintenance
Save to ROM
Hit any key to start system reboot.
Type the configuration file's
location, or click Browse to
Choose the Xmodem
Then click Send.
Section 34.4 on page 333
P-793H User's Guide
or by following the
335