P-793H User's Guide
Table 85 Tools > Configuration (continued)
LABEL
Upload
Reset to Factory
Default Settings
Reset
Note: Do not turn off the device while configuration file upload is in progress.
When the ZyXEL Device has finished restoring the selected configuration file, the following
screen appears.
Figure 128 Configuration Upload Successful
The device now automatically restarts. This causes a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 129 Network Temporarily Disconnected
If the ZyXEL Device's IP address is different in the configuration file you selected, you may
need to change the IP address of your computer to be in the same subnet as that of the ZyXEL
Device. See your Quick Start Guide or the appendices for details on how to set up your
computer's IP address.
You might have to open a new browser to log in again.
If the upload was not successful, a Configuration Upload Error screen appears.
240
DESCRIPTION
Click this to restore the selected configuration file. See below for more information
about this.
Note: Do not turn off the device while configuration file upload is in
progress.
Click this to clear all user-entered configuration information and return the ZyXEL
Device to its factory defaults. There is no warning screen. See
54
for more information about resetting the ZyXEL Device.
Section 2.5 on page
Chapter 19 Tools