Chapter 13 Bandwidth Management; Bandwidth Management Overview; Application-Based Bandwidth Management; Subnet-Based Bandwidth Management - ZyXEL Communications P-793H User Manual

This chapter contains information about configuring bandwidth management, editing rules and
viewing the ZyXEL Device's bandwidth management logs.

13.1 Bandwidth Management Overview

ZyXEL's Bandwidth Management allows you to specify bandwidth management rules based
on an application and/or subnet. You can allocate specific amounts of bandwidth capacity
(bandwidth budgets) to different bandwidth rules.
The ZyXEL Device applies bandwidth management to traffic that it forwards out through an
interface. The ZyXEL Device does not control the bandwidth of traffic that comes into an
interface.
Bandwidth management applies to all traffic flowing out of the router, regardless of the
traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the ZyXEL Device
and be managed by bandwidth management.
The sum of the bandwidth allotments that apply to any interface must be less than or equal to
the speed allocated to that interface in the Bandwidth Management Summary screen.

13.2 Application-based Bandwidth Management

You can create bandwidth classes based on individual applications (like VoIP, Web, FTP, E-
mail and Video for example).

13.3 Subnet-based Bandwidth Management

You can create bandwidth classes based on subnets.
The following figure shows LAN subnets. You could configure one bandwidth class for
subnet A and another for subnet B.

Chapter 13 Bandwidth Management

Bandwidth Management
C
H A P T E R
P-793H User's Guide
1 3
187