Configuration File Upload; Ftp File Upload Command From The Dos Prompt Example; Figure 218 Menu 24.7.1: System Maintenance - Upload System Firmware; Figure 219 Menu 24.7.2: System Maintenance - Upload System Configuration File - ZyXEL Communications P-793H User Manual

P-793H User's Guide

Figure 218 Menu 24.7.1: System Maintenance - Upload System Firmware

To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system.
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your workstation and "ras" is the
remote file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.

34.5.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.

Figure 219 Menu 24.7.2: System Maintenance - Upload System Configuration File

Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload the system configuration file, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configurationfilename rom-0" where "configurationfilename"
is the name of your system configuration file on your workstation,
which will be transferred to the "rom-0" file on the system.
4. The system reboots automatically after the upload system
configuration file process is complete.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
To upload the firmware and the configuration file, follow these examples

34.5.3 FTP File Upload Command from the DOS Prompt Example

1 Launch the FTP client on your computer.
2 Enter "open", followed by a space and the IP address of your ZyXEL Device.
3 Press [ENTER] when prompted for a username.
336
Menu 24.7.1 - System Maintenance - Upload System Firmware
Chapter 34 Firmware and Configuration File Maintenance
Then type "root" and