Figure 150 Menu 11.1: Remote Node Profile (Node 8); Table 101 Menu 11.1: Remote Node Profile (Node 8) - ZyXEL Communications P-793H User Manual

P-793H User's Guide

Figure 150 Menu 11.1: Remote Node Profile (node 8)

Rem Node Name= ?
Active= Yes
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
The following table describes the labels in this menu.

Table 101 Menu 11.1: Remote Node Profile (node 8)

FIELD
Rem Node Name
Active
Outgoing
My Login
My Password
Retype to Confirm
Authen
Pri Phone #
Sec Phone #
Edit PPP Options
Rem IP Addr
Edit IP/Bridge
Edit ATM Options
Edit Advance Options This field is displayed if you are editing remote node 1, and it is only enabled for
272
Menu 11.1 - Remote Node Profile (Backup ISP)
DESCRIPTION
Enter the name of the ISP.
Select whether or not you want to use this Internet connection.
This section is only enabled for PPPoA or PPPoE connections.
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Enter the password again.
This field appears if you select PPPoE in the Encapsulation field. Select what
type of authentication your ISP uses. Select CHAP/PAP if you want the ZyXEL
Device to support both choices.
Type the phone number(s) for this remote node. If the Primary Phone number
is busy or does not answer, your ZyWALL dials the Secondary Phone number,
if available. Some areas require dialing the pound sign # before the phone
number for local calls. Include a # symbol at the beginning of the phone
numbers as required.
Press [SPACE BAR] to select Yes and press [ENTER] to configure the PPP
settings for the backup ISP. Menu 11.2 appears.
This field displays the type of routing the ZyXEL Device uses.
This field is enabled if Route is IP. If you want to set up the WAN IP address
and advanced features for the WAN port, press [SPACE BAR] to select Yes
and press [ENTER]. Menu 11.3 appears.
This field is enabled if Route is IP. Press [SPACE BAR] to select Yes and
press [ENTER] to edit the virtual channel and ATM QoS settings. Menu 11.1.6
appears.
PPPoE connections. If you want to set up advanced features for the Internet
connection, press [SPACE BAR] to select Yes and press [ENTER]. Menu
11.1.8 appears.
Edit PPP Options= No
Rem IP Addr= ?
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Chapter 26 Remote Node Setup