Ipv6 Connection: Ethernet - ZyXEL Communications NBG4615 User Manual

16.2.1 IPv6 Connection: Ethernet

If you select Ethernet as the IPv6 Connection Type, the following screen displays.
Figure 91 Network > IPv6: Ethernet
The following table describes the fields in this screen.
Table 56 Network > IPv6: Ethernet
LABEL
IPv6 Connection Type Setup
IPv6 Connection Type
WAN IPv6 Address Setup
IPv6 Address
Subnet Prefix Length
Gateway IP Address
First DNS Server
Second DNS Server
LAN IPv6 Address Setup
LAN IPv6 address
LAN IPv6 Link-local
Address
NBG4615 User's Guide
DESCRIPTION
Select Ethernet as the IPv6 connection type if your ISP provides you a static
IPv6 address. You need to enter the IPv6 information below according to
what your ISP provided.
Enter the static IPv6 address provided by your ISP using colon (:)
hexadecimal notation.
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Enter the IPv6 address of the default outgoing gateway using a colon (:)
hexadecimal notation.
Enter the primary DNS server's IP address in this field.
Enter the secondary DNS server's IP address in this field.
Enter a valid IPv6 address for the LAN using colon (:) hexadecimal notation.
This shows the IPv6 link-local address that the NBG4615 generates
automatically.
Chapter 16 IPv6
145