Parameter Setting Default Value List; Improved Controllability; Maintenance And Check; Instructions - SMC Networks IP8001 Series Operation Manual

■Parameter Setting Default Value List

To return changed parameter to ex-factory data, input the parameter setting default value.
Parameter setting default value is the same as basic type. Refer operation manual "SMART
POSITIONER (No.:IP8S-OM00009)".

Improved Controllability

PID constant of this positioner is automatically set during calibration. However, operation speed is
delayed or controllability becomes unstable due to the used actuator size. These symptoms can be
improved by changing PID constant. Refer operation manual "SMART POSITIONER
(No.:IP8S-OM00009)".

Maintenance and Check

Maintenance item of HART communication type is the same as basic type. Refer operation manual
"SMART POSITIONER (No.:IP8S-OM00009)" for maintenance items.

Instructions

Precautions of HART communication type is the same as basic type. Refer operation manual
"Smart Positioner (No.:IP8S-OM00009)" for precaution on instruction.
3535
No.IP8S-OM00013