Sanyo VCC-HD5400 User Manual page 98

3
Click to view the PTZ controller.
PTZ
4
Use the controller to adjust the orientation of the camera lens while monitoring live video
displayed on the monitor.
The displayed image is fixed at the WIDE end.
5
Click the desired detection area number button.
The selected button is displayed in orange.
6
Drag the mouse over the screen to specify the detection area and click
The detection area is configured over the specified area.
While changing the orientation of the camera lens, you can set up to 32 detection areas to anywhere in the whole
monitored area (up to 5 spots at the WIDE end).
Moving, resizing, and deleting detection area:
Click a number button, perform the desired operation (move, resize, or delete), and then click
Move: Select the detection area and drag it using the mouse.
Resize: Place the cursor over the border of the detection area and drag it using the mouse.
Delete: Click
7
Click a number button to select the [AREA] check box.
The corresponding detection area is enabled.
You may select two or more check boxes.
DELETE ( 1 )
Working with Administrator Configuration Screens 52/79
.
SET
SET
.