Sanyo VCC-HD5400 User Manual page 94

4
Use the controller while monitoring live video displayed on the monitor.
The sequential operations such as panning, tilting and zooming are recorded one after another.
Recordable operations are as follows:
Panning, tilting, move to preset positions, zooming, auto focusing (AF)
Recording capacity is limited for each setting. The memory usage is displayed on the screen in the
format of "n/100". Recording stops automatically when memory reaches full, indicating "100/100".
5
Once the operation is finished, click
Now the settings for the tour 1 have been stored.
You can follow the same steps to configure for the tours 2 to 4.
Running the Stored Tour Operation
In [TOUR], select a registration number and click
If there is no user operation for a certain length of time, this function allows the system to return to a specified
monitoring condition.
1
Specify the monitoring conditions to return to.
Disables the auto return function.
OFF:
Sequential operation 1 - 4
SEQ1 - 4:
PAN1 - 4: Auto panning operation 1 - 4
Tour operation 1 - 4
TOUR1 - 4:
Moves to a specified preset position.
PRESET:
Specify a number for [PRESET NUMBER].
PREVIOUS: Returns to the previous monitoring condition.
2
Set a time period the system waits before it performs auto return, and click
10SEC, 20SEC, 30SEC, 40SEC, 50SEC, 1MIN, 2MIN, 3MIN, 4MIN, 5MIN, 6MIN, 7MIN, 8MIN, 9MIN, 10MIN
If the system is powered off while waiting for auto return, an auto return mode that was specified
before powered off will be automatically selected next time the system is powered on.
and click .
STOP SET
RUN to run the specified operation.
Working with Administrator Configuration Screens 48/79
.
SET