Sanyo VCC-HD5400 User Manual page 84

OFF: Does not increase vertical resolution while using the electronic zoom.
Use the mirror function to electronically flip the displayed subject.
If you installed the camera upside down or intend to monitor the subject in the mirror, configure the following
settings according to the installation environment of the camera.
In [MIRROR], select the desired mirror mode and click
OFF: Disables the mirror mode (normal video).
Flips the video horizontally.
H:
Flips the video vertically.
V:
HV: Flips the video vertically and horizontally.
The configured settings are applied in common to all the camera views.
Configure to turn ON or OFF the motion sensor function for each camera view.
If you do not have to detect the motion in subjects, set [MOTION] to "OFF".
In [MOTION], select either ON or OFF, and click
The configured settings are applied only to the camera views that were specified in [VIEW].
You cannot configure [MOTION], if the electronic sensitivity boosting (SENSE UP) or the long
exposure shutter mode (LONG) is enabled.
You can configure the privacy mask settings to hide specific portions of surveillance video for privacy protection.
When a privacy mask is set, the resolution, frame rate, and image quality of the live video image may be limited.
.
SET
SET .
Working with Administrator Configuration Screens 38/79