Sanyo VCC-HD5400 User Manual page 4

Video output
LAN
EX-HDD Connector
SD Card Slot
Alarm input
Alarm output
Audio input/output
Communication method
Protocol
Baud Rate
Address
SD memory card
External HDD
Image/video
compression
Video size (H.264)
Video size (JPEG)
Picture quality
Interface
Protocol
Audio
Simultaneous access
Security
HD Output: HDMI terminal (TYPE C)
Monitor output: BNC terminal (MONITOR OUT)
10BASE-T/100BASE-TX (RJ-45 connector)
For connecting an external hard disk drive case
1 (SDHC compliant, max. 32 GB supported)
4 (NO/NC), also used for switching between day and night modes
2 (NO/NC, 16V, 150 mA, open collector)
Audio input (white: 3.5-mm mini jack)
Audio output (black: 3.5-mm mini jack)
RS-485
SSP, PELCO-D
2400, 4800, 9600, 19200
1 - 255 (sanyo SSP: 1 to 127)
Normal recording, alarm recording, backup video recording in event of a network
failure, log information
Normal recording, alarm recording, backup video recording in event of a network
failure, log information
H.264/JPEG
(16:9) 1920×1080, 1280×720, 640×360, 320×180
(4:3) 1600×1200, 1280×960, 1024×768, 640×480, 320×240
(16:9)1920×1080, 1280×720, 1024×576, 640×360
(4:3) 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240
QUALITY mode: BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
BITRATE mode: User-specified bit rate
10BASE-T/100BASE-TX
TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, DDNS, RTP, RTSP, RTCP
G.711 (Bidirectional)
20
BASIC authentication (ID/password), SSL, IP filtering
Introduction 4/15