Sanyo VCC-HD5400 User Manual page 81

Set the gamma correction level to adjust the contrast or brightness level.
In [GAMMA], select the gamma correction level and click
0.45: Gamma correction level = 0.45
Gamma correction level = 1
1:
MODE1: Increases the contrast of the whole subject.
MODE2: Increases the contrast in dark areas further.
The configured settings are applied only to the camera views that were specified in [VIEW].
Selecting "MODE1" or "MODE2" may result in excessively bright images depending on the target
object.
Configure the DNR (Digital Noise Reduction) function to reduce noise at low conditions.
In [DNR], select "ON" and click
The configured settings are applied only to the camera views that were specified in [VIEW].
Enabling the DNR function may cause ghosts and blurs if the subject includes any moving object,
which results in low resolution.
Configure the auto or manual focusing mode.
AUTO: Selects the auto focus mode.
MANUAL: Selects the manual focus mode (Sets the focusing distance and speed appropriate for the target
object).
The configured settings are applied in common to all the camera views.
SET .
Working with Administrator Configuration Screens 35/79
SET .