Sanyo VCC-HD5400 User Manual page 56

1
In [CLOCK ADJUST], select "ON (NTP)".
2
Configure the required settings shown below and click
1 To automatically adjust the clock time every day, in [TIME TO SYNCHRONIZE], select the 24-hour time to
which you want to adjust the clock (for example, "10:30").
2
To adjust the clock to the current time, click
3 In [NTP SERVER ADDRESS], type the IP address or domain name of the NTP server from which you
want to retrieve the date and time information.
4
In [LOG], the last entry of the operation log related to automatic clock adjustment is shown.
When "ON (NTP)" in [CLOCK ADJUST] is selected, the clock adjustment function adjusts the clock in
the following timings.
When the camera is turned on
At the time selected in [TIME TO SYNCHRONIZE] (every day)
When any change is made to the settings on this screen
To use a domain name, you must specify the DNS server address in [DNS SERVER ADDRESS] on
the NETWORK SETTINGS screen.
1
In [CLOCK ADJUST], select "ALARM IN1".
2
In [CLOCK IN], select the 24-hour time to which you want to adjust the clock (for
example, "22" for 10 p.m.) when the switch connected to the ALARM IN1 terminal turns
on, and click
SET
The clock time will not be adjusted if the difference between the set time and the current time
exceeds the range of -29 to +30 minutes.
.
.
SET
REFRESH
.
Working with Administrator Configuration Screens 10/79