Sanyo VCC-HD5400 User Manual page 76

1
In [SHUTTER], select "SHORT".
2
In [SHUTTER SPEED], select the desired shutter speed and click
VCC-HD5400P: 25, 50, 120, 250, 500, 1000, 2000, 4000, 10000
VCC-HD5400: 30, 60, 100, 250, 500, 1000, 2000, 4000, 10000
Each of the above shutter speed values represents the denominator "n" of the fraction 1/n. For
example, selecting "500" means to set a shutter speed of 1/500 second.
The long exposure shutter mode has a longer exposure time than the field storage time.
The long exposure shutter mode increases the sensitivity of the camera to make the subject brighter.
You cannot configure the long exposure shutter mode (LONG), if the electronic sensitivity boosting
(SENSE UP) or the electronic iris (EI) is enabled.
You cannot configure the long exposure shutter mode (LONG), if [MOTION] is enabled.
1
In [SHUTTER], select "LONG".
2
In [SHUTTER SPEED], select the desired shutter speed and click
x1, x2, x4, x8, x16, x32
Each of the above shutter speed values represents a multiple of the field storage time. The higher
the value, the longer the exposure time.
Setting an excessively long exposure time may result in ghosts, blurs and white spots if the subject
includes any moving object.
Configure the video signal gain value automatically or manually.
Automatically configuring gain value using AGC
Manually configuring gain value
Auto Gain Control (AGC) is a function that automatically adjusts the gain value of the camera's video
signal amplifying circuit according to the brightness of the subject to maintain a constant signal
output.
The configured settings are applied only to the camera views that were specified in [VIEW].
.
SET
SET .
Working with Administrator Configuration Screens 30/79