Selecting Sounds; Recalling/Saving A Scene (Scene Select Mode); Recalling A Scene; Selecting A Scene From A List - Roland JUPITER-X Reference Manual

Selecting Sounds

On the JUPITER-X, you select a scene and play the sounds that are
assigned to each of the five parts.
Recalling/Saving a Scene
The JUPITER-X can store a total of 256 scenes, organized as 16 banks
each containing 16 scenes.

Recalling a Scene

1 .
Press the [SCENE] button
The SCENE TOP screen appears.
Bank number–Scene number
LFO editor
Current part name
9:
Key Sw is ON
8:
Key Sw is OFF
– : Part Sw is OFF
+:
Arpeggio part
– :
Current part
5 :
Being edited simultaneously
2 .
Hold down the [SCENE] button
buttons to select a scene bank .
Instead of using the buttons, you can also use the
select.
3 .
Use the [1]–[16] buttons
Instead of using the buttons, you can also use the
select.
MEMO
The system parameter "Startup SCENE"
scene that is selected at start-up.
&
"System Parameter List"
(Scene Select Mode)
to enter scene select mode .
Current internal
Scene Name
temperature
ENV editor
Bluetooth Sw
9:
PARTIAL Sw is ON
8:
PARTIAL Sw is OFF
– :
Being edited
and press the [1]–[16]
[1] knob
to select a scene .
[2] knob
lets you specify the
(p. 44)

Selecting a Scene from a List

1 .
Press the [SCENE] button
The SCENE TOP screen appears.
The [1]–[16] buttons
2 .
Press the [ENTER]
The scene list appears.
3 .
Use the [2] knob
You can also make this selection by using the
buttons instead of the
Alternatively, you can use the
or next scene bank.
4 .
Press the [ENTER] button

Saving a Scene

The edits that you make to a part or tone, or the data that you record,
are temporary. They are lost when you turn off the power, or when
you select another scene or tone. If you want to keep the result of your
editing or recording, you must save it to a scene.
* If you want to save a tone individually, use the tone write operation
(p. 27).
1 .
Press the [SCENE]
button .
The WRITE MENU screen appears.
2 .
Use the [1] knob
to
[ENTER] button .
3 .
Use the [2] knob
then press the
to
If you want to rename the scene that's being saved, use the
PAGE [<] [>] buttons
specify characters.
4 .
Press the [ENTER]
A confirmation message appears.
If you decide to cancel, press the
5 .
To execute, press the
to enter scene select mode .
switch to scene select mode.
button .
to select a scene .
PAGE [ ] [ ]
[2] knob.
[1] knob to jump to the previous
to confirm the scene .
button, and then press the
to select "SCENE," and then press the
to select the save-destination, and
[ENTER] button .
to move the cursor and use the
button .
[EXIT] button.
[ENTER] button .
[WRITE]
[2] knob to
13