Messages And How To React To Them - Pioneer AVIC-N3 Operation Manual

Symptom
Playback is not possible.
A parental lock message is displayed
and playback is not possible.
Parental lock cannot be canceled.
Dialog language (and subtitle lan-
guage) cannot be switched.
No subtitles are displayed.
Playback is not with the audio lan-
guage and subtitle language settings
selected in DVD SETUP.
Switching the viewing angle is not
possible.
The picture is extremely unclear/dis-
torted and dark during playback.

Messages and how to react to them

The following messages may be displayed by your navigation system.
❒ There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Message
Please insert the appropriate disc.
This is not the appropriate disc.
Please insert the appropriate disc.
Irregular speed pulse signal is
detected. Please power off the sys-
tem and check the installation. After
you have checked, please re-boot the
system and press "OK".
Cause
The loaded disc has a different
region number from the navigation
system.
Parental lock is on.
The code number is incorrect.
You have forgotten your code
number.
The DVD playing does not feature
multiple language recordings.
You can only switch between items
indicated in the disc menu.
The DVD playing does not feature
subtitles.
You can only switch between items
indicated in the disc menu.
The DVD playing does not feature
dialog or subtitles in the language
selected in DVD SETUP.
The DVD playing does not feature
scenes shot from multiple angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
The disc features a signal to prohibit
copying. (Some discs may have this.)
When
If you try to use a disc which is
incompatible with this system.
If you insert a disc upside down.
If the disc is dirty.
If the disc is cracked or otherwise
damaged.
If the navigation system does not
receive the vehicle speed pulse.
Action (See)
Replace the disc with one featuring
the same region number as the navi-
gation system. (➞ "Hardware Man-
ual")
Turn parental lock off or change the
level. (➞ Page 111)
Input the correct code number. (➞
Page 111)
Touch "CLEAR" 10 times to cancel
the code number. (➞ Page 111)
You cannot switch among multiple
languages if they aren't recorded on
the disc.
Switch using the disc menu.
Subtitles are not displayed if they are
not recorded on the disc.
Switch using the disc menu.
Switching to a selected language is
not possible if the language selected
in DVD SETUP is not recorded on the
disc.
You cannot switch between multiple
angles if the DVD does not feature
scenes recorded from multiple
angles.
Switch between multiple angles
when watching scenes recorded
from multiple angles.
Since the navigation system is com-
patible with the copy guard analog
copy protect system, when playing a
disc that has a signal prohibiting
copying, the picture may suffer from
horizontal stripes or other imperfec-
tions when viewed on some displays.
This does not mean the navigation
system is malfunctioning.
What to do
Insert a suitable disc.
Insert the disc with the label upward.
Clean the disc.
Insert a normal, round disc.
Consult your Pioneer dealer.
139