Memory Navi Mode; How To Listen To A Cd - Pioneer AVIC-N3 Operation Manual

(2) (3)
(1) Current location
(2) Distance to the destination
(3) Estimated time of arrival (or travel time to
your destination)
(4) Memory navi indicator
Flashing green indicates that the data is being
read. When the data reading has completed, this
indicator disappears from the screen.
➲ Memory navi mode ➞ Page 127

Memory navi mode

While the DVD Map Disc is inserted, you can
store the data on the DVD Map Disc into the
memory of the navigation system. If the DVD Map
Disc is removed from the navigation system after
the data is stored, navigation is performed using
the data in the memory (memory navi mode). In
the memory navi mode, you can play a music CD
or DVD-Video on the navigation system while nav-
igating at the same time. The operation automati-
cally switches to the memory navi mode when the
DVD Map Disc is removed from the navigation
system.
Navigation in the memory navi mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared to when the navigation system is using all
of the information available on the DVD Map Disc
(DVD navi mode). These functions buttons, which
cannot be used in the memory navi mode, are
indicated in light gray. (For details, see page 28.)
If you want to use these functions, please insert
the DVD Map Disc again. In addition, you may
need to insert the DVD Map Disc and store new
data in the memory during navigation operation,
such as when the destination is far away. The
memory navi mode uses the following map data
to perform navigation.
26
(1) (4)
Memory navi indicator
When new route guidance starts, the route data
from the DVD Map Disc is read into the memory
of the navigation system. The status of the mem-
ory navi mode is indicated by the following icons
on the lower right of the map screen.
(Flashing Green): Reading the data
(Solid Green): Operated in memory navi mode
(Solid Red): Operated in memory navi mode,
but the distance for guidance is 12.5 mi or less.
❒ Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the DVD Map Disc.
When disappears, memory navi mode is
ready. You can now remove the DVD Map Disc
and use the memory navi mode function.

How to listen to a CD

You can listen to audio CD by removing the DVD
Map Disc from the navigation system.
➲ About Memory Navigation ➞ "Memory navi
mode" on page 26. (For details, see page 127.)
1
Press the EJECT button to remove the
DVD Map Disc.
2
Insert the CD to the disc loading slot.