Switching The Dimmer Setting For Sub-Display; Changing The Voice Output Of The Navigation Guidance; Switching The 5.1Ch Setting; Other Functions - Pioneer AVIC-N3 Operation Manual

Switching the dimmer setting
for sub-display
To prevent the sub-display from being too bright
at night, the sub-display is automatically dimmed
when the vehicle's headlights are turned on. You
can turn dimmer on or off.
1
Touch "SUB DISP DIMMER" in the
INITIAL menu.
Touching "SUB DISP DIMMER" switches
between "ON" and "OFF".
❒ Initially, this function is set to OFF.
Changing the voice output of the
navigation guidance
When there is a navigation guidance, you can
mix the guidance voice/beep sound from a navi-
gation with the audio sound from this system.
You can select the speaker output the navigation
guidance.
1
Touch "GUIDE VOICE" in the INITIAL
menu.
Each touch of the "GUIDE VOICE" changes
the settings as follows:
L+R (Front speakers) — R (Front right
speaker) — L (Front left speaker)

Switching the 5.1ch setting

When the navigation system is combined with
the multi-channel processor system (sold sepa-
rately), you can use the multi-channel sound.
Enter the following setting when combining the
multi-channel processor system.
• DO NOT enter this setting before you con-
nect the multi-channel processor system.
(If this setting is entered, the RCA will out-
put maximum volume for the multi-chan-
nel processor system.) Pioneer is not
responsible for any damage to the speaker
equipment caused by ignoring this warn-
ing.
114
1
Touch the source icon and then touch
"SOURCE OFF" to turn source off.
When the source icon is not displayed, you
can display it by touching the screen.
2
Turn the ACC OFF, and then turn it ON
again.
3
Press the EQ button, and then without
releasing it press the ANGLE (-) button.
4
Release the ANGLE (-) button first, and
then release the EQ button.
5
Touch "5.1ch" in the INITIAL menu.
If you touch "5.1ch", it will be turned "ON".
If you touch "5.1ch" again to turn "OFF" the
setting, "5.1ch" will disappear. If you want to
turn it "ON" again, you have to repeat the pro-
cedure from the Step1.

Other Functions

Setup adjustments

(1)
(1) Setup menu display
Shows the setup function names.
➲ How to display the SETUP menu ➞ Page 74

Setting the video input

You can switch the setting according to the con-
nected component.
• Select "VIDEO" to watch video of a connected
component as AV source.
• Select "M-DVD" to watch video of a connected
DVD player as S-DVD source.
1
Touch "AV INPUT" in the SETUP menu.
Each touch of the "AV INPUT" changes the
settings as follows:
• OFF — No video component is connected
• VIDEO — External video component