Tv Tuner; Watching The Tv Tuner - Pioneer AVIC-N3 Operation Manual

TV Tuner

• For safety reasons, visual images cannot
be viewed while your vehicle is in motion.
To view visual images, you must stop in a
safe place and put on the parking brake
before setting your route (see page 13
Interlock for details).

Watching the TV tuner

(1) (2)
(5)
You can use the navigation system to control a TV
tuner, which is sold separately.
For details concerning operation, refer to the TV
tuner's operation manual. This section provides
information on TV operations with the navigation
system that differ from those described in the TV
tuner's operation manual.
When you attempt to watch visual images while
driving, the warning Viewing of front seat
video source while driving is strictly prohib-
ited. will appear on the screen.
❒ Pressing the DISP button changes the
screen display.
➲ Switching screen display ➞ Page 118
(1) Source icon
Shows which source has been selected.
(2) Band indicator
Shows which band the TV tuner is tuned to.
(3) Preset number indicator
Shows which preset has been selected.
(4) Channel indicator
Shows which channel the TV tuner is tuned.
(5) Preset list display
Shows the preset list.
(3) (4)
1
Touch the source icon and then touch
"TV" to select the TV.
2
Touch the screen to display the touch
panel keys.
3
Touch "BAND" to select a band.
Touch "BAND" repeatedly until the desired
band is displayed, TV1 or TV2.
4
To perform manual tuning, touch  or 
briefly.
The channels move up or down step by step.
You can also perform manual tuning by mov-
ing the joystick left or right.
5
To perform seek tuning, keep touching 
or  for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
You can cancel seek tuning by touching either
 or  briefly.
If you keep touching  or  you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
You can also perform seek tuning by holding
the joystick left or right.
101