Pioneer AVIC-N3 Operation Manual page 145

Message
Data Read error. Back to Original
Background.
Please do not turn power off.
There are no files available in /BG/
folder.
Please insert the appropriate disc.
Route calculation was not possible.
No route data can be stored. You
should insert the disc that contains
the map data of the current position.
• Scaling down.
• Scaling up.
• No map data available on this
scale. Scaling up.
• No map data available on this
scale. Scaling down.
Failure in the memory recovery proc-
ess.
Memory navigation is presently not
possible.
The map data could not be stored.
Previous setting will be kept.
This function is not available with the
current map disc.
Failed to save to memory. Please re-
enter setting.
When
Failed to read the data because the
CD-R is damaged or dirty. Or, the
pick-up lens of the DVD drive is dirty.
The BG folder exists on the PC card
but no data in JPEG format exists.
The BG folder exists on the CD-R but
no data in JPEG format exists.
In the memory navi mode, if the
Auto-reroute does not function for
some reason.
The area to be set for "Map In Mem-
ory" is "areas not stored on the DVD
Map Disc (unrecorded areas)".
In the memory navi mode, if the DVD
Map Disc is inserted without chang-
ing the scale (only when the point is
stored on the DVD Map Disc).
When the scale that had been previ-
ously displayed cannot be displayed
for the following reasons:
• The disc was ejected and the sys-
tem was changed to the memory
navi mode.
• In the memory navi mode, the map
was scrolled to outside the memory
area. Or the vehicle moved outside
of the memory area.
• The map was scrolled to areas not
stored on the DVD Map Disc (unre-
corded areas). Or the vehicle
moved to unrecorded areas.
• The map was scrolled from unre-
corded areas to the memory area.
Or, the vehicle moved from unre-
corded areas to the memory area.
Failed to complete the recovery of the
memory area because the disc could
not be read for some reason, result-
ing in deletion of the memory.
Recovery was performed for the
memory area after failing to read the
disc data for some reason (The mem-
ory area that was previously set will
be recovered).
The current position is "areas not
stored on the DVD Map Disc (unre-
corded areas)" and an attempt was
made to zoom in to make the scale
0.5 mile or more.
The settings could not be saved for
some reason.
What to do
Try re-reading the data by inserting a
clean CD-R.
Clean the pick-up lens with a com-
mercially available cleaning kit for
DVD, then try to reading again.
Use the appropriate data after read-
ing "Changing Background Picture"
on page 62.
Insert the DVD Map Disc.
• Change the memory area to be set
to "areas stored on the DVD Map
Disc".
• Insert the DVD Map Disc contain-
ing that area.
The scale automatically returns to
the one that was set in the DVD navi
mode before being changed to the
memory navi mode.
If the desired scale cannot be
selected, insert the DVD Map Disc
that contains that area and then
change the scale.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
• Clean the disc.
• Clean the DVD drive.
• Consult the Pioneer Local dealer if
this message persists.
Zoom in again after the vehicle
moves into an area stored on the
DVD Map Disc.
Or, replace the DVD Map Disc and
try to zoom in again.
• Retry.
• Consult the Pioneer Local dealer if
this message persists.
143