Handling and Care of the Disc 17 Notes Before Using the System Playable discs 17 Important (Serial Number:) 5 DVD-Video disc region numbers 17 After-sales service for Pioneer products 5 Meaning of marks on DVDs 18 Visit Our Website 5 Condition memory 18 Features 5...
Manual Overview Terminology Before moving on, take a few minutes to read the This manual describes information related to the following information about the conventions used hardware, such as the names of parts for the nav- in this manual. Familiarity with these conventions igation system or precautions for use.
❒ The navigation features of this product (and ❒ The data encoded in the hard disk drive is the rear view camera option if purchased) are intellectual property of the provider, and the intended solely as an aid to you in the opera- provider is responsible for such content.
➲ Setting the source to rear source ➞ Operation Manual • THE LIGHT GREEN LEAD AT POWER ❒ The map screen navigation images output to CONNECTOR IS DESIGNED TO DETECT the “Rear Display” differ from standard NTSC PARKED STATUS AND MUST BE CON- format images.
For your own security and ware updates. convenience, be sure to record this number on the enclosed warranty card. Features After-sales service for Pioneer products General Please contact the dealer or distributor from where you purchased the product for its after-...
CD playback Music recognition technology and related data ® are provided by Gracenote . Gracenote is the Music CD/CD-R/CD-RW playback is possible. industry standard in music recognition technol- MP3 file playback ogy and related content delivery. For more infor- It is possible to play back MP3 files recorded on mation visit www.gracenote.com.
When recording, pay attention to the following points: Only digital output of DTS audio is possible. If ❒ Pioneer does not compensate for contents navigation system’s optical digital outputs are that cannot be recorded or any loss of not connected, DTS audio will not be output, so recorded data due to a malfunction or failure select an audio setting other than DTS.
❒ Never touch the LCD screen with anything The microprocessor must be reset under the fol- besides your finger when operating the Touch lowing conditions: Panel functions. The LCD screen can scratch — Prior to using this navigation system for the easily.
Chapter 2 How to Use the Navigation System and Names of the Parts Checking Part Names and Functions This section gives information about the names of the parts and main the features using the buttons. ❒ For more details on operations and limitations of functions, please refer to the Operation Manual. 23 4 OPEN CLOSE button RESET button...
V button P.LIST (/) button Press to enter the PICTURE ADJUSTMENT Press to change the discs in the magazine when mode. using a multi-CD player (sold separately). Press to switch preset channels when using the ➲ Operating the Picture Adjustment ➞ Opera- radio.
Sensor’s initial learning automatically starts. [Video] (refer to Operation Manual). Until the 3D Hybrid Sensor’s initial learning is ❒ “External unit” refers to a Pioneer product complete, the positioning is performed by GPS (such as one available in the future) where,...
Turning the Source Off Inserting a disc Press the OPEN CLOSE button. • Press the AV button and hold until the The LCD panel opens, and the disc loading source turns off. slot appears. ❒ This navigation system also can be Disc loading slot switched off by turning the ACC (ignition) OFF.
❒ The built-in DVD drive plays one, standard, 12- Touch [Back]. cm or 8-cm (single) disc at a time. Do not use an adapter when playing 8-cm discs. ❒ If you cannot insert a disc completely or if an inserted disc is not recognized, check that the label side of the disc is up.
Appendix When the Hard Disk Drive is Dis- Playable discs connected DVD and CD discs that display the logos shown below generally can be played back on this built- If there is no hard disk drive due to repair or serv- in DVD drive.
Meaning of marks on DVDs scratches, or those that are warped may not play properly. Do not use such discs. The marks below may be found on DVD disc • Avoid touching the recorded (non-printed side) labels and packages. They indicate the type of surface when handling the disc.
Specifications Preout max output level/output impedance ........... 2.0 V/1k Ω Equalizer (3-Band Parametric Equalizer): General Rated power source .... 14.4 V DC Frequency..... 40/80/100/160 Hz (10.8 V to 15.1 V allowable) Q Factor....0.35/0.59/0.95/1.15 (+6 dB Grounding system ....Negative type when boosted) Maximum current consumption Gain.......
FM tuner Frequency range....87.9 MHz to 107.9 MHz Usable sensitivity....8 dBf (0.7 µV/75 Ω, mono, S/ N: 30 dB) Signal-to-noise ratio .... 75 dB (IHF-A network) Distortion......0.3 % (at 65 dBf, 1 kHz, stereo) 0.1 % (at 65 dBf, 1 kHz, mono) Frequency response ....
TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL:55-9178-4270 Published by Pioneer Corporation.