Problems In The Audio Screen (Common); Problems In The Audio Screen (During Dvd-Video Playback) - Pioneer AVIC-N3 Operation Manual

Problems in the audio screen (common)

Symptom
Playback is not possible.
There's no picture.
There's audio and video skipping.
Rear display picture disappears.
Nothing is displayed and the touch
panel keys cannot be used.

Problems in the audio screen (during DVD-Video playback)

Symptom
No sounds are heard.
The volume level will not rise.
The icon is displayed, and opera-
tion is not possible.
The picture stops (pauses) and the
unit cannot be operated.
The picture is stretched, the aspect is
incorrect.
138
Cause
The disc is dirty.
The loaded disc is a type your naviga-
tion system cannot play.
Non compatible video system disc is
loaded.
The parking brake cord is not con-
nected.
The parking brake is not applied.
The navigation system is not firmly
secured.
The source disc being listened to
with the navigation system has been
ejected.
The REAR/GUIDE button was
pressed and REAR ON mode
switched off.
There was a problem with the rear
display or a faulty wiring connection,
for example.
Rear View is selected on the screen. Select view mode other than Rear
When the shift lever is in [R], rear
view camera images are displayed.
(When "NAVI" is selected in REAR
DISP menu.)
The source without a video is
selected.
Operating the PICTURE ADJUST-
MENT.
The setting for the rear view camera
is incorrect.
The shift lever was placed in [R]
when the rear view camera was not
connected.
Cause
Cables are not connected correctly.
The unit is performing still, slow
motion or frame-by-frame playback.
"dts" is selected for the DVD-Video
disc sound track.
The operation is prohibited for the
disc.
The operation is not compatible with
the disc's configuration.
Reading of data has become impos-
sible during playback.
The aspect setting is incorrect for the
display.
Action (See)
Clean disc. (➞ "Hardware Manual")
Check what type the disc is.
Change to a disc compatible to your
video system.
Connect the parking brake cord, and
apply the parking brake.
Connect the parking brake cord, and
apply the parking brake.
Secure the navigation system firmly.
Before ejecting the disc, switch the
source. This problem may occur
when certain connection methods
are used.
Press the REAR/GUIDE button to
turn REAR ON mode on.
Check the rear display and its con-
nection.
View.
Move the shift lever to a position
other than [R]. (Select "SOURCE" in
REAR DISP menu.)
Switch the source with a video.
There is no picture on the rear dis-
play while the PICTURE ADJUST-
MENT is carried out.
Connect a rear view camera cor-
rectly.
Press the NAVI/AV button to return
to the source display and then select
the correct setting for CAMERA.
➲ About CAMERA setting ➞
Page 115
Action (See)
Connect the cables correctly.
There is no sound during still, slow
motion or frame-by-frame playback.
Switch to a non "dts" sound track.
This operation is not possible.
This operation is not possible.
After touching  once, start play-
back once more.
Select the appropriate setting for
your display. (➞ "Hardware Manual")