Xm Tuner; (Gex-P10Xmt, Gex-P920Xm); Listening To Xm Satellite Radio; Switching The Xm Channel Select Mode - Pioneer AVIC-N3 Operation Manual

XM Tuner

(GEX-P10XMT, GEX-P920XM)

Listening to XM Satellite Radio

(1) (2)
(7)
You can use the navigation system to control a
XM satellite digital tuner (GEX-P10XMT, GEX-
P920XM), which is sold separately.
For details concerning operation, refer to the XM
tuner's operation manuals. This section provides
information on XM operations with the navigation
system which differs from that described in the
XM tuner's operation manual.
Only the logo data that is contained in the naviga-
tion DVD Map Disc can be displayed for each
channel. The icon of a newly established channel
that is not contained in the disc cannot be dis-
played. When no icon can be displayed, the fol-
lowing substitute icon is displayed.
Substitute icon
❒ The logo data is not displayed during the
memory navi mode.
(1) Source icon
Shows which source has been selected.
(2) XM band indicator
Shows the XM band which has been selected.
(3) XM preset number indicator
Shows what XM preset has been selected.
(4) XM channel number indicator
Shows to which XM channel number the tuner is
tuned.
(4)
(3) (6) (5)
(8)
(5) XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all chan-
nels in ALL CH mode, and select a channel from
selected category in CATEGORY mode.
➲ Switching the XM channel select mode ➞
Page 89
(6) XM channel category
Shows the category of broadcast channel.
(7) Detail information or preset list display
Shows the detail information of the broadcast
channel currently being received or the preset
list.
(8) Category icon
Shows the category icon for the selected chan-
nel.
➲ Switching between the detail information dis-
play and the preset list display ➞ Page 90
1
Touch the source icon and then touch
"XM" to select the XM.
2
Touch "BAND" to select a XM band.
Touch "BAND" repeatedly until the desired
XM band is displayed: XM1, XM2 or XM3.
3
To perform tuning, touch
The channels move up or down step by step. If
you keep touching
increase or decrease channel number contin-
uously. You can also perform manual tuning
by moving the joystick left or right.
Switching the XM channel
select mode
You can switch the mode between the two meth-
ods for selecting and listing the channel.
ALL CH mode :
You can select a channel from all channels when
you operate.
CATEGORY mode :
You can select a channel within selected cate-
gory when you operate.
1
Touch "MODE" to select the desired
channel select mode.
Touch "MODE" repeatedly to switch between
the two modes.
or .
or , you can
89