Setting The Slide Back Function; Setting The Automatic Open Function; Changing The Wide Screen Mode - Pioneer AVIC-N3 Operation Manual

Dvd multimedia av navigation server
Hide thumbs Also See for AVIC-N3:
Table of Contents

Advertisement

Setting the slide back function

You can adjust the LCD panel slide position to
prevent the display from hitting the shift lever of
an automatic vehicle when it is in P (park) posi-
tion.
❒ Please be careful, as the LCD panel will slide
immediately after the setting is turned "ON".
1
Touch "FLAP SET BACK" in the SETUP
menu.
Touching "FLAP SET BACK" switches
between "ON" and "OFF".
Setting the automatic open
function
When you do not wish the display to open/close
automatically, you can set the automatic open
function to the manual mode.
1
Touch "AUTO FLAP" in the SETUP
menu.
Each touch of the "AUTO FLAP" changes
the settings as follows:
• MANUAL — You have to press the OPEN/
CLOSE button to open/close the display
• AUTO — The display automatically opens/
closes when power to navigation system is
turned on

Changing the Wide Screen Mode

• For safety reasons, visual images cannot
be viewed while your vehicle is in motion.
To view visual images, you must stop in a
safe place and put on the parking brake
before setting your route (see page 13
Interlock for details).
• Press the WIDE/PIC ADJ button to select
the desired setting.
Press the WIDE/PIC ADJ button repeatedly
to switch between the following settings:
FULL (full) — JUST (just) — CINEMA (cin-
ema) — ZOOM (zoom) — NORMAL (nor-
mal)
116
FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, enabling you to enjoy a 4:3 TV picture
(normal picture) without any omissions.
JUST (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizon-
tally toward the ends of the picture, enabling you
to enjoy a 4:3 picture without sensing any dispar-
ity even on a wide screen.
CINEMA (cinema)
A picture is enlarged by the same proportion as
FULL or ZOOM in the horizontal direction and
by an intermediate proportion between FULL and
ZOOM in the vertical direction; ideal for a cin-
ema-sized picture (wide screen picture) where
captions lie outside the frame.
ZOOM (zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cin-
ema-sized picture (wide screen picture).
NORMAL (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
❒ Different settings can be memorized for each
video source.
❒ When video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear differently.
❒ Remember that use of this system for com-
mercial or public viewing purposes may con-
stitute an infringement on the author's rights
protected by the Copyright Law.
❒ Video will appear grainy when viewed in
CINEMA or ZOOM mode.
❒ The navigation map and the rear view camera
picture is always FULL.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic n3 - navigation system with dvd player

Table of Contents