Demo Mode; Time; Modify Current Location; Hardware Info - Pioneer AVIC-N3 Operation Manual

Map In Memory

The memory area is the area in the map, which is
being read in advance for the memory navi mode.
There are two ways of setting the memory area.
Around Current Position
A square that has sides of approximately 10.6
mile (17 km) with the selected location at the
center is read into the memory.
Indicate the map you want to store in the memory
by touching , ,  or . Then, adjust the map
scale to the one you desire, and touch "OK".
Continuously touching , ,  or  allows you
to rapidly scroll the map screen.
❒ An area not stored in the DVD Map Disc can-
not be memorized.
Around Current Route
Sets the surrounding currently set route to the
memory area. The route to the destination will
appear on screen. Please press "OK".
❒ The extent of the information that can be set
in the memory area is about 6.6 mi (10.6 km)
surrounding the route.
Set "Go To"
➲ Registering and changing your favorite loca-
tion ➞ Page 49

Demo Mode

This is a demonstration function for shops. After
a route is set, the simulation of the route guid-
ance to a destination is automatically displayed.
Normally, set this to "Off".
Repeat :
Repeat demo drive.
Off* :
Demo Mode is set off.
❒ If you eject the DVD Map Disc during the
demo drive, the demo mode will be stopped.

Time

Adjusts the systems clock. The time difference
(+, –) between the time originally set in your navi-
gation system is set here.
You can also select summer time On/Off.
➲ Time settings ➞ Page 126
Summer Time
Choose whether or not to take summer time into
account.
On :
Summer time is taken into account.
Off* :
Summer time is not taken into account.
❒ When the period of summer time comes, or
when the summer time ends, your navigation
system does not automatically change the
summer time setting.
➲ Change the summer time setting ➞ Page 126

Modify Current Location

Touch the screen to adjust the current position
and direction of the vehicle displayed on the map.

Hardware Info

Touch "Hardware Info" in the Setting Menu to
display.

Connection Status

➲ Connection Status ➞ Page 65

3D Calibration

➲ 3D Calibration ➞ Page 65

Service Info Screen

Displays the disc production number and version
information.
71