Option1 Settings - Panasonic PT-D10000 Operating Instructions Manual

Option1 settings

MENU
This menu can be used to make a variety of
picture and projector settings.
MENU MENU
Press to display the Press to display the
MAIN MENU screen. MAIN MENU screen.
Press to select Press to select
"OPTION1". "OPTION1".
Press to display the Press to display the
"OPTION1" menu. "OPTION1" menu.
MAIN MENU MAIN MENU
PICTURE PICTURE
POSITION POSITION
ADVANCED MENU ADVANCED MENU
DISPLAY LANGUAGE DISPLAY LANGUAGE
OPTION1 OPTION1
OPTION2 OPTION2
TEST PATTERN TEST PATTERN
SIGNAL LIST SIGNAL LIST
NETWORK NETWORK
SECURITY SECURITY
MENU SELECT MENU SELECT
SUB MENU SUB MENU
ENTER ENTER
Adjusting color matching
When multiple sets are used simultaneously, this
projector allows the user to correct the difference of
colors among the sets.
1. Press ▲▼ to select "COLOR
MATCHING".
OPTION1 OPTION1
COLOR MATCHING COLOR MATCHING
▲▼◄►
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
ENTER
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID
AUX DVI EDID AUX DVI EDID
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
DEFAULT
2. Press ◄► to switch "COLOR
MATCHING".
• The setting will change as follows each time
◄► is pressed.
• OFF:
Color matching adjustment is not carried out.
• 3COLORS:
It is possible to adjust the 3colors of "R (Red)",
"G (Green)" and "B (Blue)".
• 7COLORS:
It is possible to adjust the 7colors of "R (Red)",
"G (Green)", "B (Blue)", "Cy (Cyan)", "Mg
(Magenta)", "Ye (Yellow)" and "Wh (White)".
• MEASURE:
Refer to "Adjusting the color matching using
a colorimeter" on the next page for details on
these modes.
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
EDID2(PC) EDID2(PC)
EDID2(PC) EDID2(PC)
OFF OFF
P IN P P IN P
2 2
ON ON
MENU SELECT MENU SELECT
CHANGE CHANGE
OFF
MEASURE
3COLORS
7COLORS
67
ENGLISH –