Panasonic PT-D10000 Operating Instructions Manual page 86

How to use network function (continued)
Network connections
The projector is equipped with network functions, and web browser controls can be used to carry out the following
operations from a computer.
• Projector settings and adjustments
• Projector status display
• Transmission of E-mail messages if there is a problem with the projector
Note
• A LAN cable is required to use the network function.
• • A Web browser is required to use this function. Make sure that a Web browser is available in the system. A Web browser is required to use this function. Make sure that a Web browser is available in the system.
• • Use Microsoft Windows 98SE/Me/NT4.0/2000/XP for the OS of your personal computer. Use Microsoft Windows 98SE/Me/NT4.0/2000/XP for the OS of your personal computer.
• • The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later. The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later.
• • To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail
feature is available in your system. feature is available in your system.
• • Use a straight insulated LAN cable which supports category 5 or above. Use a straight insulated LAN cable which supports category 5 or above.
• • The length of LAN cable must be 100 m or shorter. The length of LAN cable must be 100 m or shorter.
■
Name and function of network function parts
IN IN OUT OUT
REMOTE 1 REMOTE 1 REMOTE 2 IN REMOTE 2 IN
IN IN
OUT OUT
VIDEO VIDEO S-VIDEO IN S-VIDEO IN
Attention
• If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the
discharge of static electricity.
Be careful not to touch metallic part of LAN terminal or LAN cable.
86
– ENGLISH
PC PC
LAN cable (straight) LAN cable (straight)
RS-232C IN RS-232C IN RS-422 IN RS-422 IN
SERIAL SERIAL
R/P R/P G/Y G/Y B/P B/P
R R B B
SYNC/HD SYNC/HD VD VD
RGB 1 IN RGB 1 IN
LAN cable (straight) LAN cable (straight)
RS-422 OUT RS-422 OUT
LAN LAN
RGB 2 IN RGB 2 IN
DVI-D IN DVI-D IN
Projector Projector
LAN terminal (10BASE-T/100BASE-TX) LAN terminal (10BASE-T/100BASE-TX)
Connect LAN cable here. Connect LAN cable here.
LAN LINK/ACT lamp (green) LAN LINK/ACT lamp (green)
This lights when a LAN cable is connected This lights when a LAN cable is connected
and flashes when signals are being received and flashes when signals are being received
or sent. or sent.
LAN10/100 lamp (yellow) LAN10/100 lamp (yellow)
This lights when a 100BASE-TX connection This lights when a 100BASE-TX connection
is established. is established.