Panasonic PT-D10000 Operating Instructions Manual page 73

4. Press ▲▼ to select the item to
be set, and press ◄► to switch
the setting.
• MAIN WINDOW:
The input terminal for the main window is
displayed. The ◄► buttons can be used to
select the input terminal.
SIZE: The user can specify the display size of
the main window between 10 % and 100 %.
POSITION: The user can specify the display
position of the main window on the screen.
• SUB WINDOW:
The input terminal for the SUB WINDOW is
displayed. The ◄► buttons can be used to
select the input terminal.
SIZE: The user can specify the display size of
the subwindow between 10 % and 100 %.
POSITION: The user can specify the display
position of the subwindow on the screen.
• FRAME LOCK:
The user can select the window to apply frame
lock.
"MAIN WINDOW": Frame lock is set for the
input signals specified for the main window.
"SUB WINDOW": Frame lock is set for the input
signals specified for the subwindow.
• TYPE:
The user can select the window that is
displayed by priority when two windows overlap.
"MAIN WINDOW": The main window is
displayed by priority.
"SUB WINDOW": The subwindow is displayed
by priority.
Note
• The P IN P function is not available depending on
the input signals and the selected input terminals.
Refer to "List of P IN P" for details. (p. 119)
• The main window's picture adjustment values such
as the picture mode, gamma selection and color
temperature setting for the main window will be
applied.
• In the normal screen (when the menu is not
displayed), the ◄► buttons can be used to switch
the size and position of the main window and
subwindow when the P IN P function is on.
Setting FUNC1
The user can specify the function of the "FUNC 1"
button on the remote control.
1. Press ▲▼ to select "FUNC1".
OPTION1 OPTION1
COLOR MATCHING COLOR MATCHING
LARGE SCREEN CORRECTION LARGE SCREEN CORRECTION
AUTO SIGNAL AUTO SIGNAL
AUTO SETUP AUTO SETUP
BACK COLOR BACK COLOR
DVI EDID DVI EDID
AUX DVI EDID AUX DVI EDID
P IN P P IN P
FUNC1 FUNC1
OSD POSITION OSD POSITION
OSD MEMORY OSD MEMORY
MENU SELECT MENU SELECT
CHANGE CHANGE
2. Press ◄► to switch "FUNC1".
• The setting will change as follows each time
◄► is pressed.
P IN P
SYSTEM SELECTOR
• P IN P:
Enables setting of P IN P to "OFF", "USER 1",
"USER 2", or "USER 3. (p. 72)
• SUB MEMORY:
The sub memory can be switched. (p. 41)
• SYSTEM SELECTOR:
Allows the system selector to be switched.
(p. 54)
OFF OFF
OFF OFF
OFF OFF
BLUE BLUE
EDID2(PC) EDID2(PC)
EDID2(PC) EDID2(PC)
OFF OFF
P IN P P IN P
2 2
ON ON
SUB MEMORY
ENGLISH –
73